DuraShield is a two-component waterborne epoxy-modified acrylic coating formulated for use as an asphalt pavement maintenance coating, primarily for parking lot applications.

DuraShield Solar Gray is formulated with advanced solar reflective technology to maximize pavement cooling with a low-glare gray color that provides durable aesthetics in vehicular applications.

StreetBond SB 120 is a two-component advanced waterborne epoxy-modified acrylic coating, and can be used on textured (stamped) pavement, non-textured (flat) asphalt pavement, and on concrete with proper surface preparation. It is formulated for use on pedestrian areas with low or no vehicular traffic.

StreetBond SB 150 is a two-component advanced waterborne epoxy-modified acrylic coating designed for application on textured (stamped) or non-textured (flat) asphalt pavement. It can be used on concrete with proper surface preparation and primer. StreetBond SB 150 is formulated for use on both pedestrian and vehicular applications.

StreetBond Sealer Concentrate can reduce dirt and tire pickup in hot climates and create a semi-gloss finish over StreetBond pavement coatings.

TrafficPatternsXD® is an extremely durable preformed thermoplastic material that incorporates a unique aggregate-reinforced formula with unprecedented wear resistance. Supplied at 150 mil thickness, the 2 x 2 Preformed Thermoplastic sheets of material are easily positioned, heated, and then stamped into the asphalt using StreetHeat® asphalt reheating technology. TrafficPatternsXD® can be applied using a StreetHeat Heater and supplemented with the Flint 2000EX or Magnum Heat Torch.

DuraTherm® preformed thermoplastic is specially-designed preformed thermoplastic road markings that are inlaid into imprinted asphalt using StreetHeat® asphalt reheating teschnology. The process of inlaying DuraTherm preformed thermoplastic into asphalt protects it from wear and ensures that it retains its attractive look for years.

Communities across the country agree that DuraTherm preformed thermoplastic enhances both the beauty of their neighborhoods and pedestrian safety among shared roadway users. DuraTherm can be applied using a StreetHeat Heater and supplemented with the Flint 2000EX or Magnum Heat Torch.

TrafficPatterns® is a durable preformed thermoplastic pavement marking material used primarily for streetscape and traffic calming purposes on public roads and private properties. TrafficPatterns Preformed Thermoplastic provides a cost-effective alternative to the use of brick and stone pavers because the material is surface applied and virtually maintenance free.

Available in 125-mil thicknesses, the 2 ft. x 2 ft. Preformed Thermoplastic sheets of interconnected material are easily lifted and positioned onto an asphalt or concrete surface for application with a propane heat torch or large heater. TrafficPatternsGF® can be applied using a StreetHeat Heater and supplemented with the Flint 2000EX or Magnum Heat Torch.

DecoMark® preformed thermoplastic is surface applied and does not alter or impair the substrate. Preformed thermoplastic application does not require expensive capital equipment, customized tools, templates, or grids. DecoMark® preformed thermoplastic provides extensive uses at many places.

DecoMark® preformed thermoplastic maximizes traffic guidance, increases brand awareness, enhances community pride, and promotes school spirit with durable preformed thermoplastic horizontal surface signage that is engineered to last 6 to 8 times longer than paint, and even longer in areas with only pedestrian traffic. DecoMark® design and color combinations are virtually endless. DecoMark® can be applied using a StreetHeat Heater and supplemented with the Flint 2000EX or Magnum Heat Torch.

TrafficPatternsLT® is a preformed thermoplastic pavement marking material that provides a more durable and skid-resistant surface than typical epoxy coatings or paint. Preformed Thermoplastic application is simple with a propane heat torch or an infrared heater.

It can be applied over newly-stamped asphalt or used as a refurbishment where previous coatings have worn away. This durable Preformed Thermoplastic alternative eliminates the need to repaint again and again. TrafficPatternsLT® can be applied using a StreetHeat Heater and supplemented with the Flint 2000EX or Magnum Heat Torch.